Service Hotline:0755 28130169

Language
Home > Products > Metalworking&New Material Processing Fluid < Back to list

Water-based cutting fluid


Product model

Typical use concentration

5% concentration dilution PH

Appearance of diluent

Specific gravity (H2O=1)

Product performance introduction and appropriate processing technology

SYNCOOL 8000

5%-20%

9.2

Clear and transparent liquid

Cast iron, carbon steel, stainless steel

A fully synthetic grinding fluid with high cost performance designed specifically for grinding processing, free of nitrite, phenol, etc., with excellent rust prevention performance! It can be used for rust prevention of cast iron parts during the process without grinding. It has strong antibacterial ability and excellent service life. Excellent heat dissipation performance can extend the service life of the grinding wheel. Is the first quality of cast iron grinding processing! Suitable for various grinding processes including centerless grinding, surface grinding, etc., and for short-term indoor rust protection of ferrous metals.

SYNCOOL 9000

5.0%-20%

9.4

Clear and transparent liquid

Cast iron, carbon steel, stainless steel, copper

A general purpose fully synthetic abrasive fluid that uses a new formulation technology and does not contain substances such as phenol and nitrite. It has excellent foam inhibition performance, less work carried away, and contains unique anti impurity oil components, which makes it easy to separate the lubricating oil used in other parts of the leaked machine, and maintain the lasting stability of the working fluid. It is very suitable for centralized fluid supply systems, significantly improving the service life of the working fluid and reducing the use cost of the grinding fluid. Suitable for various grinding processes including centerless grinding, surface grinding, etc., and for light to medium load cutting of ferrous metals. In addition, it is also widely used in grinding and cutting processing in the air conditioning compressor industry。

SYNCOOL 9000L

5.0%-20%

9.4

Clear and transparent liquid

Carbon steel, stainless steel, copper

Selected water-soluble vegetable polyesters provide a powerful extreme pressure lubrication for a new type of fully synthetic abrasive fluid. It can completely replace the emulsified or semi synthetic cutting fluids widely used in the production of cast iron engines, significantly extending the service life of the cutting fluid, especially suitable for centralized fluid supply systems, significantly improving the smoothness of the machining surface, reducing tool wear, and is easily biodegradable, with low environmental pressure! In the case of boundary friction, it can prevent the occurrence of sintering and welding fusion, making it outstanding in heavy load machining. Suitable for various grinding processes, including centerless grinding, surface grinding, etc., especially in strong grinding with outstanding performance! At the same time, it has performed very well in the field of cast iron cutting.

SYNCOOL 9000RT

5.0%-20%

7.7

Clear and transparent liquid

Aluminum alloy cutting, grinding, high gloss machining, etc

Developed using the latest formulation technology, dedicated to aluminum alloy high gloss machining, providing excellent extreme pressure lubrication of all synthetic products. It can significantly improve the smoothness of the machined surface, reduce tool consumption, add special surfactants, provide excellent product wettability, and ensure that the workpiece surface is free of residues and oil stains. At the same time, it also has excellent foam inhibition ability, anti rust ability and product stability, which can effectively solve various problems in high gloss processing.

SYNCOOL 9050

5.0%-20%

7.7

Clear and transparent liquid

Cast iron, carbon steel, stainless steel, copper, aluminum alloy

Using the latest high-end technology, with extremely strong lubricity, it can significantly improve the smoothness of the processing surface, extend the service life of the tool, and perform very well in various high load grinding and cutting processes. At the same time, it provides a high effective base value, significantly improving the service life of the product. It is suitable for various grinding processes such as centerless grinding and surface grinding of ferrous metals, as well as light load cutting processes.

SYNCOOL 10000

5.0%-15%

8.6

Clear and transparent liquid

Cast iron, carbon steel, stainless steel, copper, and various aluminum alloys

SYNCOOL ® 10000 is a universal and environmentally friendly fully synthetic cutting and grinding fluid with a new technical formulation that is free of sulfur, chlorine, phosphorus, boron, phenol, nitrite, and fungicides. Containing special water-soluble polymer and vegetable based ester, it has extraordinary lubricity. Suitable for light to medium load cutting and grinding processes including carbon steel, stainless steel, aluminum alloys, etc.

SYNCOOL S8L

5.0%-20%

9

Clear and transparent liquid

Steel, cast iron

The latest formulation technology is specially designed for precision grinding of precision components such as bearings! The product has excellent lubricity, rust prevention, cooling, cleaning, and defoaming properties. It is suitable for precision grinding of steel and cast iron, ensuring the surface smoothness of the machined surface. The product has good pH control, does not contain strong irritants, is gentle to the skin, and can effectively prevent the occurrence of skin allergies. Suitable for stand-alone and centralized systems!

SYNCOOL® 9000CY

5.0%-20%

7.5

Clear and transparent liquid

Aluminum alloy cutting and grinding

SYNCOOOL ®  9000CY adopts a new technical formula and is a general-purpose fully synthetic grinding fluid that does not contain phenol or nitrite. Containing special water-soluble polymer, it has good aluminum protection, such as 7-series aluminum alloy, excellent lubrication and cooling performance.

SYNCOOL®
826

5.0%-15%

9.4

Clear and transparent liquid

Cast iron, carbon steel, stainless steel roller mill, etc

SYNCOOL ® 826 is a chemical synthetic fluid of the latest technology, which combines the most advanced surface treatment technology, making this product have good iron chip sedimentation and excellent rust prevention ability, as well as very low foam control ability. Special additives greatly improve processing accuracy and grinding wheel life.

SYNCOOL®
8001

5%-20%

9.6

Clear and transparent liquid

Grinding and cutting of steel and iron, etc

SYNCOOL ® 8001 is a chemical synthetic liquid with the latest technology, which integrates the most advanced surface treatment technology, making this product have good iron chip sedimentation, excellent rust prevention ability, and very low foam control ability.

SYNCOOL®
8020

5%-20%

8

Clear and transparent liquid

Carbon steel, stainless steel, copper, aluminum alloy

SYNCOOOL ®  8020 is a fully synthetic grinding/cutting concentrate specially designed for grinding aluminum alloy wheels. Its Ph value is low, it does not contain fungicides, and it will not cause harm to people or the environment. It has a long service life, good sedimentation, and no salting out phenomenon.

SYNCOOL® 9070

5%-20%

7.6

Clear and transparent liquid

Carbon steel, stainless steel, copper, aluminum alloy

SYNCOOOL ®  9070 is a general-purpose fully synthetic grinding fluid that uses a new technical formulation and does not contain phenol or nitrite. Containing special water-soluble polymer, it has good aluminum protection, such as 7-series aluminum alloy, excellent lubrication and cooling performance.

SYNCOOL® 10000i-800

5.0%-20%

8.6

Clear and transparent liquid

Cast iron, carbon steel, stainless steel, aluminum alloy

SYNCOOOL 10000i-800 uses a new technical formulation and is a general-purpose, environmentally friendly, fully synthetic cutting fluid that does not contain chlorine, phenol, or nitrite. Containing special water-soluble polymer, it has excellent lubricity and is particularly suitable for the processing of 6-series aluminum alloys.

SYNCOOL® 10000i-800

5.0%-20%

8.6

Clear and transparent liquid

titanium alloy

SYNCOOOL ®  10000i-800 is a water-soluble cutting and grinding fluid designed for titanium alloys. Containing special water-soluble polymer, it has extraordinary lubricity. The lubricating performance of 10000i-800 titanium alloy machining fluid not only far exceeds that of common fully synthetic metal machining fluids, but also has the cutting effect of pure oil machining titanium alloy. It can completely replace them for heavy processing. It contains no chlorine, phenol, or nitrite, is environmentally friendly, very gentle, and has almost no irritation to the human body. Good biological stability, long-term use can also maintain the stability of the cooling liquid, low foam, no mineral oil, and easy to handle waste liquid

SYNCOOL®
S8L-40

5% -20%

9

Clear and transparent liquid

Copper, aluminum, can also be used in ferrous metals such as cast iron, carbon steel, and stainless steel

SYNCOOOL ®  S8L-40 adopts a new technical formula and is a general-purpose fully synthetic grinding fluid that does not contain phenol, nitrite, and other substances. It contains special impurity resistant oil components, making it easy to isolate other lubricating oils that leak into the working fluid, maintaining lasting stability of the working fluid, and significantly improving the service life of the working fluid.

SYNCOOL®
XPG

5%-10%

9.6

Yellow clear liquid

Cast iron, carbon steel, stainless steel, hard alloy

SYNCOOL ® XPG is a state-of-the-art chemical synthetic fluid that contains special high molecular polymers to provide excellent lubrication and low foam properties, particularly suitable for areas that require special cleaning, and for medium to heavy duty machining with high cutting lubrication requirements. With good chip sedimentation and anti impurity oil ability, excellent rust prevention ability, and very low foam, it is the first choice of all synthetic products for high-strength grinding of cemented carbide.

SYNCOOL®
GCM

5%-10%

9.2

Clear and transparent liquid

Tempered glass, semi tempered glass, hot melt glass, carved glass, etc

SYNCOOL ® GCM is a chemical synthetic fluid of the latest technology, which combines the most advanced surface treatment technology, making this product have good glass debris sedimentation and very low foam. Special additives greatly improve the processing accuracy and the life of the grinding wheel. To maximize the brightness of the grinding surface, it is the first choice for glass and ceramic grinding.

SYNCOOL®
CRM

5%-10%

9.2

Clear and transparent liquid

pottery and porcelain

CRM is a fully synthetic cutting and grinding fluid specially designed for ceramic cutting and grinding. This product contains no nitrite and exhibits excellent performance in both hard and soft water.

SYNCOOL®
S8L-30

5%-20%

9

Clear and transparent liquid

Steel, cast iron, stainless steel, copper

SYNCOOOL ®  S8L-30 adopts a new technical formula and is a general-purpose fully synthetic grinding fluid free of phenol, nitrite, and other substances. It contains special impurity resistant oil components, making it easy to isolate other lubricating oils that leak into the working fluid, maintaining lasting stability of the working fluid, and significantly improving the service life of the working fluid.

SEMCOOL®
6070

5.0%-20%

9.22

Light blue white lotion

Widely used in the processing of various metal materials, steel, cast iron, stainless steel, nickel, and high silicon aluminum alloys have extremely good performance.

SEMCOOL6070 is a semi synthetic cutting fluid developed on the basis of SEMCOOL 6000 by applying the new inactive disulfide coating agent technology formula. The lotion particle size is very small and the lotion is stable. The lubrication performance is improved by about 25%. And environmental protection does not contain chlorine, nitrite, formaldehyde, low odor. Mix with water to prepare a microemulsion white stable liquid. The effective base value has been significantly increased, making it more biologically stable. At the same time, it has good lubrication, extreme pressure, and cooling characteristics.

SEMCOOL®7030

5.0%-20%9.45Yellow to amber transparent

SEMCOOL 7030 semi synthetic microemulsion low carbon biodegradable cutting fluid is a product developed to comply with the national 2030 carbon peak policy. It is suitable for both large central cooling systems and small stand-alone units. This product has a variety of application capabilities, including milling, drilling, tapping, reaming, and peristaltic grinding. Widely used in the processing of various metal materials, steel, cast iron, stainless steel, nickel, high silicon, and various aluminum alloys have excellent performance.

FRANCOOL SEMCOOL7030 is a semi synthetic low-carbon cutting fluid developed on the basis of SEMCOOL 6070 by applying the new modified plant based degradable technology formula. The lotion particle size is very small and the lotion is stable. The lubrication performance is improved by about 25% - 35%. It is environmentally friendly and does not contain phosphorus, boron, zinc, chlorine, nitrite, or formaldehyde, and has a low odor, meeting REACH and ROHAS standards. It is mixed with water to form a microemulsion white stable liquid. The effective base value increases by 30%, making it more biologically stable. At the same time, it has good lubrication, extreme pressure, and cooling characteristics.

SEMCOOL®
6000F

5.0%-20%

9.1

Microemulsion translucent liquid

Cast iron, carbon steel, stainless steel, copper, aluminum alloy

Semisynthetic cutting fluid with submicron emulsified particles, introduced with foreign green protection technology, contains no formaldehyde and has no odor, prevents any hand injuries, and protects the health of employees. It is particularly suitable for processes requiring more manual touch, and does not corrode various metal materials. It is particularly suitable for washing, turning, boring, drilling, tapping, gear hobbing, and reaming of aluminum alloys. It can also be tried on ferrous metals.

SEMCOOL® 6010

5.0%-20%

9.4

Microemulsion translucent liquid

Cast iron, carbon steel, stainless steel

The newly upgraded new formula, especially the introduction of new technology, comprehensively improves the rust prevention ability of the product, and is specifically designed for the processing of cast iron. It has excellent foam suppression performance, excellent water quality adaptability, and excellent performance in both soft and hard water. Its ultra-long service life makes it easy to use in centralized system applications. At the same time, outstanding lubricating extreme pressure and excellent graphite sedimentation ensure the processing quality of the processing area. Suitable for grinding and cutting ferrous metals such as cast iron and carbon steel.

SEMCOOOL® 6030

5.0%-20%

9.20-9.80

Microemulsion white liquid

Aluminum alloy, cast iron, steel

A general purpose semi synthetic cutting fluid that uses the latest formulation to meet the processing requirements of various types of aluminum alloys. It has anti impurity oil performance, maintains the stability of the processing fluid, and excellent biological stability. It is not easy to generate odor after long-term use. Its service cycle is extremely long, reducing the number of changes in the entire tank, reducing maintenance costs, and at the same time, the amount of workpiece taken away is also very small. It reduces the amount of concentrated liquid to be replenished, making it more suitable for the application of centralized liquid supply systems! Suitable for processing various types of aluminum materials, including turning, milling, grinding, and other loads.

SEMCOOL® 6050

5.0%-20%

9

Microemulsion white liquid

Steel, aluminum alloy

A semi synthetic cutting fluid that uses the latest technological formulation and does not contain harmful substances such as phenol, nitrite, chlorine, formaldehyde, etc. Vegetable based ester extreme pressure agent and high-efficiency oiliness agent provide excellent boundary lubrication and fluid lubrication ability, meet the requirements of high-strength metal processing extreme pressure lubrication, effectively reduce tool wear, improve product processing smoothness, and have very low operation foam and very low odor. It does not contain fungicides and has strong biological stability. It contains highly effective rust inhibitors and metal corrosion inhibitors, and has good rust prevention effects on ferrous metals. It also has good protection effects on aluminum alloys, copper, and their alloys. It can not only ensure the rust prevention requirements between processes, but also protect the machine tool and fixture from rust.

SEMCOOL 6050SP

5.0%-20%

9

Microemulsion white liquid

alufer

SEMCOOL 6050SP is a water-soluble semi synthetic metal cutting fluid that is microemulsified with water. It has excellent protective effects on aluminum alloys, excellent lubrication performance, very low odor and irritation, and is very suitable for various aluminum alloy cutting operations.

SEMCOOL® 6030-EC

5.0%-20%

9.5

Microemulsion white liquid

Steel, iron, high nickel alloy, stainless steel

SEMCOOL ®  6030EC is a semi transparent water-soluble semi synthetic metal cutting fluid concentrate. With excellent cooling, lubrication, and extreme pressure effects, it can meet the cutting and grinding operations of various materials, especially suitable for the processing of engine housings and other components in the automotive industry.

SEMCOOL®
Vp510

5.0%-20%

9

Microemulsion translucent liquid

Cast iron, carbon steel, stainless steel, copper, aluminum alloy

The latest product specially designed for stainless steel processing, with a completely new formulation design, has a very low odor, and even in closed workshops, it still does not produce unpleasant odors. With a stable microemulsion particle structure, containing boundary extreme pressure lubricants, providing good lubrication performance, effectively reducing friction in the cutting area, and preventing welding and fusion between the tool and the processed metal! Make machining smoother, protect the tool, extend its service life, reduce tool costs, and maintain machining accuracy! Suitable for high-speed and heavy-duty processing of ferrous metals including stainless steel and aluminum alloy!

SEMCOOL® Vp520

5.0%-20%

9.1

Microemulsion translucent liquid

Cast iron, carbon steel, stainless steel, copper, aluminum alloy, titanium alloy

Specially designed for processing aluminum materials, the unique upgraded formula brings better aluminum alloy protection performance. Even the most demanding aviation aluminum can ensure that it remains bright and fresh after soaking for up to 1 week! The working fluid can maintain a stable microemulsion particle structure, providing good operational performance in both soft and hard water. In the processing of various aluminum materials, it exhibits excellent processing performance, and the processing surface is highly smooth and clean, without white or black spots! Is the preferred product for aluminum alloy processing! Suitable for medium to heavy load machining processes such as turning, milling, drilling, tapping, reaming, and broaching of aluminum alloy materials.

SEMCOOL ® Vp530 

5.0%-20%

9.1

Microemulsion translucent liquid

Suitable for various processing strengths of aluminum and titanium alloys. Can also be used for cast iron, carbon steel, stainless steel, etc

The latest technical formula, closely adhering to the EU REACH regulations, all uses imported environmental friendly additives, which will not pose any obstacles to export. Excellent lubrication ability and excellent metal protection ability are suitable for various harsh metal materials, especially for high-strength processing of aluminum alloys.

SEMCOOL®
Vp550

5.0%-20%

9.2

Microemulsion translucent liquid

Cast iron, carbon steel, stainless steel

Adopting the latest technological formulation, especially introducing new technologies, comprehensively improving the extreme pressure and lubrication capabilities of the product, designed for high-strength processing such as high alloy and stainless steel. It has excellent lubrication performance, excellent water quality adaptability, and excellent performance in both soft and hard water. Its ultra-long service life makes it easy to use in stand-alone systems. Suitable for machining processes such as ferrous metal grinding, cutting, and deep drilling.

SEMCOOL® AN83

5.0%-20.0%

8.8

Milky white liquid

Aluminum alloy hard disk processing

Developed using the latest scientific and technological formulations, this new and upgraded product is specifically designed for the processing of aluminum alloy components such as computer hard disks. In addition to not adding substances required by the hard disk processing industry such as sulfur, chlorine, boron, and amine, it deliberately does not add base oil, effectively reducing the product's Repeated Hydrogen provides excellent extreme pressure, improves the surface quality of components processed, and helps control the stability of the quality of processed components! Good lubricity and cooling performance improve machining efficiency, resulting in smooth and clean surfaces of aluminum components, low machining fluid residue, and easy cleaning. Suitable for various medium to heavy load cutting processes in the computer hard disk component processing industry.

SEMCOOL® MA2400

5.0%-15%

9.3

Microemulsion translucent liquid

Aluminum alloy, magnesium alloy

SEMCOOOL ®  MA2400 is a newly developed chemical semi synthetic cutting fluid that combines the most advanced technological processes to achieve good cutting results. This technology leads similar products worldwide and solves the world's difficult problems in magnesium alloy processing.

SEMCOOL ®MA1200

5.0%-15%

9.1

Microemulsion translucent liquid

Magnesium alloy, zinc alloy

Specially designed for magnesium alloy processing, new modifications and breakthroughs are made in the original formulation technology. Special additives can inhibit the generation of magnesium scale and prevent magnesium scale from affecting the processing accuracy! The original 3p protection technology effectively organizes the reaction of H and OH ions in the processing fluid with magnesium, protects magnesium from corrosion, achieves perfect processing surface quality, and does not release hydrogen gas, making operation safe. It can also be used for corrosion protection of magnesium alloys. The specially enhanced stability further enhances its resistance to hard water, and even at a concentration of up to 5000 ppm of Mg ions, there is still no phenomenon of oil and soap evolution. Suitable for various load cutting processes of magnesium alloys.

EUMCOOL®
5030

5.0%-20%

9.23

Yellow or blue transparent

Versatility, basically all metals such as carbon steel, stainless steel, iron, aluminum alloy, copper alloy, etc

General purpose compounded lotion concentrate. EUMCOOL5030 is a microemulsion cutting fluid developed on the basis of EUMCOOL 5000 by applying the new inactive disulfide coating agent technology formula upgrade. The lotion has smaller particle size and improved lubrication performance by about 25%. It does not contain nitrite and has a low odor. It is mixed with water to form a milky white stable emulsion. The effective base value has been greatly increased, and the biological stability during use is very good.

EUMCOOL®
5000P

5.0%-20%

9.2

Milky white liquid

Copper, aluminum, can also be used in ferrous metals such as cast iron, carbon steel, and stainless steel

High quality compounded lotion concentrate. Especially excellent protection for aluminum alloys! Good lubricity and rust resistance are excellent in processing ferrous metals such as cast iron, carbon steel, and stainless steel, resulting in a higher surface finish of the workpiece. Good bacteriostatic ability. Keep the working lotion stable for a long time, suitable for all kinds of aluminum alloys, including turning, boring, drilling, tapping, broaching and other medium to heavy load processing processes, as well as for ferrous metals.

EUMCOOL® 5000S

5.0%-20%

9

Milky white liquid

Various types of aluminum alloys, aviation aluminum, and other aluminum materials can also be used in cast iron, carbon steel, stainless steel

High quality compounded lotion concentrate, carefully designed low odor new emulsion products, good antibacterial ability, keep the long-term stability of the working lotion, reduce odor, keep the workshop environment clean, create a good working environment, and improve production efficiency! Chlorine free, the product is more environmentally friendly, and the specially added synthetic ester meets the lubrication and cooling requirements for processing various metal materials, making it suitable for use in CNC machining centers. Suitable for ferrous and non ferrous metals, including turning, boring, drilling, tapping, broaching, and other medium to heavy load processing processes.

EUMCOOL® ALPR

5.0%-20%

9.2

Dark green liquid

Aluminum, carbon steel, stainless steel

SEMCOOL ® ALPR is an emulsified metal cutting fluid concentrate designed for high strength and precision machining of aluminum alloys. With excellent lubrication and cooling effects, it is particularly suitable for the aluminum alloy wheel hub processing process in the automotive industry.

ICOOLANT 20000





1. Synthetic cutting fluid 2, no bactericide 3, no B4, no nitrite 5, no chlorine, sulfur, phosphorus and silicon 6, low foam 7, low odor 8, excellent lubricity 9, application concentration can be reduced to 3% 10, can be used for almost all materials (except Mg) 11, low consumption 12, water resistance hardness up to 10000 ppm

ICOOLANT 15000





1. Vegetable oil synthetic cutting fluid 2. Component 2 is designed, and Component A contains a lubrication coefficient; Component B contains cleaning and antirust agents 3, vegetable esters with special molecular structure 4, no nitrite and formaldehyde 5, low foam 6, low odor 7, can be applied to almost all kinds of metal processing (without Mg) 8, excellent lubricity 9, innovative "zero emission" solution 10, reuse of old cleaning fluid

ICOOLANT EDBB





1. Super lubricating performance, making various materials and processes still meet requirements at low concentrations. 2. Vegetable based esters have better biodegradability and no irritation to the skin; Low oil mist design ensures that the workshop floor is no longer slippery and the operating environment is better. 3. More environmentally friendly formula design 4. Use a concentration of 3-4% and add a concentration of 1%, which is suitable for both rough and finishing processing. 5. Suitable for processing 6-series and 7-series aluminum, stainless steel, and ceramics; ADJ12 aviation material processing 6. Very strong stability, after 1000 ppm of hard water will not appear soap, making the machine tool very clean. Reduce aluminum scrap removal by 50%. 7. Low cost operation is a revolutionary product for CNC processing in the electronics industry.

ICOOLANT Oi





1. Ester cutting oil 2, colorless and transparent 3, low odor 4, low oil mist 5, excellent lubricity 6, chloride and phosphor free 7, low foam 8, applicable to all metal processing processes (including Mg)

AP NK-W系列环保型空调两器专用加工液





Affordable price - Compared to traditional air conditioner process oil, it can save nearly 25% in purchasing oil products, which is in line with the economic strategy of sustainable development;

Easy cleaning, greatly reducing cleaning costs: Our third generation process oil can not only eliminate the cost of purchasing cleaning agents, but also eliminate the cost of treating high COD wastewater;

Improve the environment, effectively reduce environmental treatment costs and cause no harm to workers: Our third generation process oil is water based, with extremely low volatility at room temperature. Basically non volatile, so there is no impact on the body of workshop workers;

Safe and reliable - The third generation process oil developed by our company uses Frank patented electrolytic water as the base fluid. Therefore, it is incombustible and has an extinguishing effect in the event of a fire.


Related Products

Recommended Products