Service Hotline:0755 28130169

Language
Home > Products > ICoolant high-end series < Back to list

High end cutting fluid


Product model

Typical usage concentration

Diluted PH at 5% concentration

Appearance of diluent

Specific gravity (H2O=1)

Product performance introduction and suitable processing technology

ICOOLANT 20000





1. Synthetic cutting fluid 2, no bactericide 3, no B4, no nitrite 5, no chlorine, sulfur, phosphorus and silicon 6, low foam 7, low odor 8, excellent lubricity 9, application concentration can be reduced to 3% 10, can be used for almost all materials (except Mg) 11, low consumption 12, water resistance hardness up to 10000 ppm

ICOOLANT 15000





1. Vegetable oil synthetic cutting fluid 2. Component 2 is designed, and Component A contains a lubrication coefficient; Component B contains cleaning and antirust agents 3, vegetable esters with special molecular structure 4, no nitrite and formaldehyde 5, low foam 6, low odor 7, can be applied to almost all kinds of metal processing (without Mg) 8, excellent lubricity 9, innovative "zero emission" solution 10, reuse of old cleaning fluid

ICOOLANT EDBB-30





1. Super lubricating performance, making various materials and processes still meet requirements at low concentrations. 2. Vegetable based esters have better biodegradability and no irritation to the skin; Low oil mist design ensures that the workshop floor is no longer slippery and the operating environment is better. 3. More environmentally friendly formula design 4. Use a concentration of 3-4% and add a concentration of 1%, which is suitable for both rough and finishing processing. 5. Suitable for processing 6-series and 7-series aluminum, stainless steel, and ceramics; ADJ12 aviation material processing 6. Very strong stability, after 1000 ppm of hard water will not appear soap, making the machine tool very clean. Reduce aluminum scrap removal by 50%. 7. Low cost operation is a revolutionary product for CNC processing in the electronics industry.

ICOOLANT Oi





1. Ester cutting oil 2, colorless and transparent 3, low odor 4, low oil mist 5, excellent lubricity 6, chloride and phosphor free 7, low foam 8, applicable to all metal processing processes (including Mg)

ICOOLANT 11000





1. Nano copper technology 2. No nitrite boron and formaldehyde 3. Low foam 4. Low odor 5. It is applicable to the processing of almost all metals 6. Very strong lubricity 7. Innovative zero emission solution 8. Reuse of cleaning waste liquid 9. Vegetable grease with unique molecular structure

ICOOLANT EDBB-50



1. Super lubricating performance, making various materials and processes still meet requirements at low concentrations. 2. Vegetable based esters have better biodegradability and no irritation to the skin; Low oil mist design ensures that the workshop floor is no longer slippery and the operating environment is better. 3. More environmentally friendly formula design 4. Use a concentration of 3-4% and add a concentration of 1%, which is suitable for both rough and finishing processing. 5. Suitable for processing 6-series and 7-series aluminum, stainless steel, and ceramics; ADJ12 aviation material processing 6. Very strong stability, after 1000 ppm of hard water will not appear soap, making the machine tool very clean. Reduce aluminum scrap removal by 50%. 7. Low cost operation is a revolutionary product for CNC processing in the electronics industry.


Related Products

Recommended Products