Pure oil based cutting oil

CUT443

achromatic colour

1.5~2.2

≥60

1a

It is prepared by using low viscosity deep refining base oil and adding various additives such as oiliness agent and rust inhibitor. Low odor, no residue. It is suitable for high-speed light load processing of nonferrous metals and for use under conditions requiring volatile processing oil.

Pure oil based cutting oil

CUT444

faint yellow

10

≥150

1a

It is made of deeply refined low viscosity base oil, added with oiliness agents, inactive extreme pressure agents, special rust inhibitors, etc. It does not contain chlorine or sulfur and has good environmental protection. Low odor, low volatility, and little residue. Suitable for various medium and light load cutting processes of non ferrous metals such as copper and aluminum.

Pure oil based cutting oil

CUT445

faint yellow

22

≥180

1a

It is made of deeply refined low viscosity base oil, added with oiliness agents, inactive extreme pressure agents, special rust inhibitors, etc. It does not contain chlorine or sulfur and has good environmental protection. It has good lubricity and thermal stability. It is very suitable for various light and medium load cutting processes for nonferrous metals and some ferrous metals.

Pure oil based cutting oil

CUT446

achromatic colour

32

≥210

1a

The imported hydrotreated three types of base oil are blended with additives such as oiliness agents, special rust inhibitors, and smoke inhibitors to form a colorless, odorless, good perspective, and process.

Pure oil based cutting oil

CUT447

faint yellow

32

≥218

1a

Imported hydrotreated three types of base oil are blended with additives such as polyol vinegar oiliness agent, special rust inhibitor, and smoke inhibitor. They are light in color, low in oil mist, and less volatile, making them effective in protecting cutting tools and improving surface finish. Suitable for various light and medium load cutting processes for nonferrous metals and some ferrous metals.

Multifunctional cutting oil

CUT55B

yellow

22

≥180

1a

It is prepared by adding non active sulfur extreme pressure agent, synthetic vinegar oiliness agent, and imported rust inhibitor to deeply refined base oil. With medium viscosity, low oil mist, strong lubricity, and wide range of material adaptability, it can be applied to multiple heavy duty precision machining processes of nonferrous metals and ferrous metals simultaneously.

Multifunctional cutting oil

CUT55C

yellow

32

≥200

1a

It is formulated from deeply refined base oil added with inactive sulfur extreme pressure agent, synthetic vinegar oiliness agent, and imported rust inhibitor. It has excellent extreme pressure lubrication, cooling, and wear reduction properties, preventing overheating and sintering of the cutting tool. It is also suitable for various heavy load precision cutting processes of nonferrous metals and ferrous metals.

Stainless steel processing oil

EP333A

yellow

22

≥160

4a

It is formulated by adding a large amount of active and inactive sulfur, chlorinated fat extreme pressure additives, synthetic vinegar oiliness agents, and oil mist inhibitors to deeply refined base oil. It has a light color, low odor, and good extreme pressure lubricity. It is especially suitable for various medium and light load precision cutting, tapping, and other processing processes of various difficult to process metals such as stainless steel and alloy steel

Stainless steel processing oil

EP333

Dark brown

27

≥180

4a

It is formulated from deeply refined base oil with a large amount of active and inactive sulfur, nitrided fat extreme pressure additives, synthetic vinegar oiliness agents, and oil mist inhibitors. It has good lubricity and extreme pressure properties, and is particularly suitable for various medium and light load precision cutting, tapping, and other processing processes of various difficult to process metals such as stainless steel and alloy steel

Stainless steel processing oil

EP555

Dark brown

32

≥180

4a

A product designed specifically for hard metals such as stainless steel and alloy steel, with moderate viscosity and excellent lubricity and wear reduction, it is particularly suitable for various heavy duty precision cutting processes for various difficult to process metals such as stainless steel and alloy steel.

Special cutting oil for magnesium aluminum alloy

UK-5

colourless

3

≥100

1a

It is formulated with deeply refined narrow distillate base oil and lubricating additives. It has low viscosity, light color, low odor, fast heat dissipation, and good lubrication and cooling performance. It is especially suitable for precision electronic magnesium alloy components and other nonferrous metal cutting occasions that are not suitable for using water-based cutting fluids.

Special cutting oil for magnesium aluminum alloy

UK-10

colourless

10

≥135

1a

It is formulated from hydrotreated low viscosity base oil added with polymer boundary lubricants, synthetic ester oiliness agents, and special metal corrosion inhibitors. It has a high flash point, low volatility, and low odor, and can prevent oxidation and corrosion phenomena such as darkening and black spots on the surface of nonferrous metals. It is recommended for medium and light load machining of magnesium, aluminum, and their alloys.

Special cutting oil for magnesium aluminum alloy

UK-22

faint yellow

22

≥160

1a

It is formulated from hydrotreated base oil added with polymer boundary lubricants, synthetic vinegar oiliness agents, and special metal corrosion inhibitors. It has a high flash point, low volatility, and low odor, and can prevent oxidation and corrosion phenomena such as darkening and black spots on the surface of nonferrous metals. It is recommended for medium to heavy load machining of magnesium, aluminum, and their alloys.

Chlorine free cutting oil

TER22

yellow

22

≥180

1a

It is formulated from deeply refined base oil added with some synthetic oils, synthetic esters, oil mist inhibitors, and advanced chlorine free additives. It has a higher flash point, better low oil mist control, and is environmentally friendly and harmless. It is recommended for deep hole drilling, medium load cutting, gear processing, and broaching of hard alloys such as stainless steel, nickel chromium alloy, and titanium alloy.

Chlorine free cutting oil

TER32

yellow

32

≥200

1a

It is formulated from deeply refined base oil added with some synthetic oils, synthetic esters, oil mist inhibitors, and advanced chlorine free additives. It has a higher flash point, better low oil mist control, and is environmentally friendly and harmless. It is recommended for deep hole drilling, medium load cutting, gear processing, and broaching of hard alloys such as stainless steel, nickel chromium alloy, and titanium alloy.

Tapping oil

GC822

Dark brown

22

≥180

2a

Made from refined mineral base oil added with active sulfur extreme pressure agent, phosphorus containing extreme pressure agent, and oily reinforcing agent, it has low friction coefficient, outstanding permeability, and washability, and is suitable for high-speed tapping and tapping processes of ferrous metals such as cast iron and carbon steel.

Tapping oil

GC832

Dark brown

32

≥200

2a

It is formulated by adding refined mineral base oil with active sulfur extreme pressure agent, phosphorus containing extreme pressure agent, and oiliness enhancer. It highlights lubricity and cooling, and can extend the service life of taps and drill bits. Suitable for tapping, tapping, calibrating, tapping, drilling and other processes of hard metals such as stainless steel and mold steel.

Tapping oil

GC846

yellow

46

≥210

2a

It is formulated from refined mineral base oil added with inactive sulfur extreme pressure antiwear agent, phosphorus containing extreme pressure antiwear agent, oiliness enhancer, and oil mist inhibitor. It highlights lubricity and rust resistance, and is suitable for tapping and tapping processes of ferrous and nonferrous metals at the same time.

Abrasive oil

GF905

faint yellow

5

≥135

2a

It is formulated with deeply refined narrow distillate base oil added with lubricants and special rust inhibitors. It has low viscosity, small odor, fast heat dissipation, strong penetration, high flash point, good cooling and cleaning properties, and is non corrosive to non ferrous metals. Suitable for listening, polishing, and ultra precision grinding of non ferrous metals such as copper and aluminum.

Abrasive oil

GF908

faint yellow

8

≥145

2a

It is formulated with deeply refined narrow distillate base oil and lubricating additives. It has low viscosity, low odor, high rust resistance, good cooling and cleaning performance, and can quickly settle abrasive debris to prevent oil contamination and adhesion. Suitable for coin grinding, polishing, and ultra precision grinding of metals such as cast iron, carbon steel, and easily chipped iron.

Abrasive oil

GF912

faint yellow

12

≥165

2a

It is formulated by adding highly effective extreme pressure agents to deeply refined narrow distillate base oil. It has low viscosity, low odor, and good extreme pressure, cooling, and cleaning properties. It can quickly settle abrasive debris and prevent oil contamination and stone sticking. Suitable for heavy duty coin grinding, polishing, and ultra precision grinding of hard metals such as cast iron and alloy steel.

Abrasive oil

GF913

faint yellow

13

≥180

2a

It is formulated by adding highly effective extreme pressure agents to deeply refined narrow distillate base oil. It has low viscosity, low odor, and good extreme pressure, cooling, and cleaning properties. It can quickly settle abrasive debris and prevent oil contamination and stone sticking. Suitable for heavy load grinding, polishing, and ultra precision grinding of hard metals such as cast iron and alloy steel.

Copper aluminum stretching oil

KJ10

yellow

68

≥220

1a

It is formulated by adding synthetic additives to deeply refined base oil. With excellent characteristics such as low viscosity, easy cleaning, and low carbon residue, it is suitable for light load stamping and stretching processing of medium thickness plates and pipes of small and medium-sized non ferrous metals such as copper and aluminum.

Forming oil

DC-19

Dark brown

120

≥200

4a

Using deeply refined mineral oil as the base oil, it is blended with a variety of highly effective lubricants, extreme pressure agents, oil mist inhibitors, and other functional additives. Low odor, low volatility, low residue, and low smoke. Suitable for multi-station high-speed molding processing of metal materials such as carbon steel, stainless steel, and cast iron, such as cold badges and warm piers.

Forming oil

DC-20

Dark brown

180

≥200

4a

Using deeply refined mineral oil as the base oil, it is blended with a variety of highly effective lubricants, extreme pressure agents, oil mist inhibitors, and other functional additives. Low odor, low volatility, low residue, and low smoke. Suitable for multi station off speed molding of hard metal materials such as carbon steel and alloy steel, such as cold piers and warm badges.

Pressing plate molding oil

SPD3015

yellow

22

180

1a

It is formulated by adding a variety of high-quality additives such as extreme pressure agents, oiliness agents, and rust inhibitors to deeply refined low viscosity base oil. It has good lubricity, rust resistance, and washability, and is suitable for continuous light load stamping and high-speed blanking of cold rolled steel and carbon steel plates.

Pressing plate molding oil

SPD3046

yellow

46

210

1a

It is formulated by adding a variety of high-quality additives such as extreme pressure additives, oiliness agents, and rust inhibitors to deeply refined base oil. It has good lubricity and rust resistance, and is suitable for medium load continuous stamping and high-speed blanking of cold rolled sheets and carbon steel plates.

Pressing plate molding oil

SPD3068

yellow

68

220

1a

It is formulated by adding a variety of high-quality additives such as extreme pressure additives, oiliness agents, and rust inhibitors to deeply refined base oil. It has good lubricity and rust resistance, and is suitable for continuous heavy load stamping and high-speed blanking of cold rolled steel and carbon steel plates.

Spark oil

ED120

Water clear

1.8

≥100

1a

It is formulated with a new type of isomerized deep dearomatic solvent oil added with strong additives. It has extremely high electrical insulation and drainage ability, can quickly wash away metal debris generated during processing, and prevent electric sparks from flying everywhere. It is an economical electric spark machining oil.

Spark oil

ED130

Water clear

2.7

≥110

1a

Advanced spark oil specially designed for precision machining, with low dryness, low flash point, low volatility, non-toxic, odorless, and no irritation to the skin, can significantly improve machining accuracy and maintain the cleanliness of the workpiece surface. It is suitable for all electrical discharge machining requirements, especially for precision electrical discharge machining processes.

Spark oil

ED180

Water clear

2.4

≥130

1a

Fully synthetic spark oil, which contains no aromatic hydrocarbons, is colorless and odorless, and is very environmentally friendly. It not only has superior comprehensive performance, but also has a higher flash point and ultra-long service life. It is not replaced for a long time, and is only added at ordinary times.

Environmentally friendly volatile oil

NK-1A

colourless

1.4

40

Quick drying type, universal type, suitable for aluminum foil punching and cutting and copper tube bending and drawing processes.

Environmentally friendly volatile oil

NK-1B

colourless

1.6

80

Quick drying type, suitable for bending and drawing processing of copper pipes for household air conditioners and central air conditioners.

Environmentally friendly volatile oil

NK-1C

colourless

2.5

100

Quick drying type, suitable for punching and cutting aluminum foil for household air conditioners and central air conditioners.